How to Use the NiSi JetMag Pro Lens Hood on Fujifilm X100

By T K FOTO TECHNIC PTE LTD | Published: 2026-10-23

Category: How-to Guides

Learn how to attach and use the NiSi JetMag Pro lens hood on your Fujifilm X100 series camera, including filter installation, magnetic hood placement, and common mistakes to avoid.

Quick Answer

To use the NiSi JetMag Pro lens hood on your Fujifilm X100 series, first screw in the 49mm adaptor with the NC UV filter, then snap on the magnetic square hood and magnetic cap. Ensure the hood is aligned with the camera's lens axis for best shading and protection.

Why the NiSi JetMag Pro is a Good Fit for X100 Cameras

The NiSi JetMag Pro is designed specifically for Fujifilm X100 series cameras, including the X100, X100S, X100F, X100T, X100V, and X100VI. This means the hood and filter are engineered to match the camera's lens and body, providing a secure fit without interfering with the viewfinder or controls.

The kit includes a premium NC UV filter with a 49mm screw-in adaptor, a magnetic square lens hood, and a magnetic lens cap. The UV filter reduces haze and blocks UV light while safeguarding the lens, and the magnetic system allows quick attachment and removal of the hood and cap.

Trade-offs and Considerations

While the magnetic design is convenient, the hood and cap are not locked in place. They can be knocked off if you bump the camera against something, so be mindful when carrying the camera in a bag or around your neck.

The 49mm front thread on the adaptor allows you to use additional filters, but adding more glass in front of the lens can increase the risk of flare. Remove the hood when shooting into strong light sources if you notice unwanted reflections.

Step-by-Step Installation and Use

Screw on the adaptor with the NC UV filter: Hold the adaptor by its edges and thread it clockwise onto the camera's lens barrel until it is snug. Do not over-tighten; it should be firm but still easy to remove. Check that the adaptor is seated evenly to avoid a tilted filter.
Attach the magnetic square lens hood: Place the hood over the adaptor so the magnetic ring aligns. It will click into place when close. Ensure the hood is oriented correctly: the wider opening faces forward for proper shading. If the hood feels loose, remove it and re-engage the magnets; a secure click is essential.
Use the magnetic lens cap when not shooting: When the camera is off or stored, snap the magnetic cap onto the hood's front opening. This protects the glass from dust and fingerprints. Remember to remove the cap before shooting; it can be easily forgotten and block the image.
Add additional filters if needed: The 49mm front thread on the adaptor allows you to attach other filters, such as a polarizer or ND filter, by screwing them onto the adaptor. This is useful for landscapes or long exposures. Stacking filters can cause vignetting on wide-angle shots, so test at your focal length before relying on it.

Product Facts

NISI JetMag Pro Lens Hood Kit for Fujifilm X100 Series: Designed for Fujifilm X100 series cameras, including X100, X100S, X100F, X100T, X100V, and X100VI. You can trust that the hood and filter will fit your specific X100 model without gaps or misalignment.
NISI JetMag Pro Lens Hood Kit for Fujifilm X100 Series
NISI JetMag Pro Lens Hood Kit for Fujifilm X100 Series: Includes NC UV filter with 49mm screw-in adaptor, magnetic square lens hood, and magnetic lens cap. The kit provides complete lens protection and light control in one package, so you don't need to buy separate components.
NISI JetMag Pro Lens Hood Kit for Fujifilm X100 Series: Premium NC UV filter with multi-layer nano-coatings reduces haze, blocks UV light, and safeguards the lens. The filter improves image clarity and protects the front element from dust and scratches without compromising color fidelity.